Bamosoft Smart
 Bamosoft Smart - Water Hardness Monitor

Water Hardness Monitor

Bamosoft Smart

  • Compatible with any water softener system

  • Monitoring water softening process

  • Easy to install

  • Reagent-free

  • Application of calcium and magnesium ion-selective electrode

  • Easy to operate and maintain

  • Environmentally friendly


BAMOSOFT Smart water hardness monitors a preset residual water hardness threshold value from the outlet of the water softener system. Threshold value is fixed at 10% of inlet raw water hardness.
Example with tap water:
- Raw water hardness inlet = 100 ppm - BAMOSOFT Alarm turns on, when softened water outlet is > 10 ppm


The device extracts softened water, time- or flow rate-controlled depending on the process, evaluates residual hardness and provides an alarm, if the water hardness exceeds 10% of the raw water hardness. The measurements are based on application of ion-selective electrode. Measuring functions and their results are represented with coloured LEDs. Measuring cycle time is about 15 minutes. Measuring can be also triggered any time by an external signal.

Technical Specifications

Dimensions Wall mounting housing, 120 x 80 x 55 mm
(Overall system 250 x 220 x 100 mm)
Ambient temperature: +5...+50°C
% R. H.: 30...80 %
Power supply (delivered unit): 100...240 V — 50/60 Hz / 0.2 A
Power consumption: 15 V DC; approx. 4 Watt
Relay output: N.C., switching power 24 V / 0.5 A
Water connections For PA tube o.d. 4 mm, i.d. 2 mm (by-pass tubing)
Recommended up stream dirt filters: ≤ 0.1 mm
Pressure limits Raw and soft water: 1 to 10 bar
Drain sample: Ø 8 mm as a minimum, pressure free
Water quality: Natural water, free of grease, oil and brine
germ content < 5000 KBE/mL
Detection range: 0.5 to 1,000 ppm
Weight 0.5 kg (1.1 lbs)
 Water hardness analyzer - Bamosoft Smart System