Resistivity/Conductivity

Bamophox 322 - Resistivity/Conductivity Regulator

 Bamophox 322 Panel Mounting


Bamophox 322 Wall Mounting

Bamophox 322

  • μS or MΩ built-in program
  • Programmable scales:
    0 - 200 Ω up to 0 - 200 MΩ
    0 - 2 μS up to 0 - 20 mS
    TOR version: 0 - 2 mS up to 0 - 2000 mS
  • Convenient probes
    factor: 10 - 1 - 0.1 - 0.01
    TOR sensor TCS 100
  • Temperature compensation
    Automatic or Manual
  • 2 analog outputs 0/4-20mA,
    galvanic insulated
  • 3 relay outputs (Normally open contact)
  • 1 input to switch the regulation on Stand-by
  • 2 models:
    Panel mounting 72 x 144
    Wall mounting IP 65
  • OPTIONS :
    RS 422 /J-BUS + LOGGER
    Extension for 2nd measurement input

Extension Terminal

An extension terminal (wall or panel mounting):

- Allows a second measurement parameter (pH, Conductivity, Chlorine, Turbidity, Flow, and 4-20 mA, depending of the model)

- The data from this blind device are displayed on the main device (second line display). A 4 wires shielded cable is necessary to link both devices (maximum length of 500m)

- The options RS422 and the data logger are shared between both BAMOPHOX.

Description

The BAMOPHOX 322 offers high flexibility on use mixing different built-in programs for regulation, thresholds, temperature compensation, and alarms. The 2 lines back lighted display, 16 alphanumerical characters, gives an easy measurement and temperature reading in any conditions. It also displays the configuration menu and settings of thresholds, analogical outputs, operation data modes, calibration steps.

Bamophox 322 - Resistivity/Conductivity Meter Mounting